Tamisium n-Butane Extractor Hawaii using Butane for extraction. n Butane extracts oils from botanicals, organic and inorganic, residues, perfumes, biofuel, biofuels, biodiesel, essential oils for homeopathic use,,, table top to high volume extractions. Full recovery of solvent after butane extraction completes.

ACQUIRING BUTANE

After you acquire your Tamisium Extractor we can supply to you Butane or direct you to a supplier.
Butane is hard to locate but we have done all the work for you and I guarantee you will be able to get all the butane you need. We can have it shipped to you directly or you can pick it up in most cases. For Table Top Extractors, Disposable Canisters should suffice. Usually they are sold in 320 ml volumes. Two should be all required for a 695 ml tank.

______________________________________________________

Solvent Recovery Kits for Large Production Extractors
for Large Production Tamisium Extractors

Heating Jackets

Recovery will recapture approximately 1 gallon of butane every 1.5 hours.
We use custom designed heating jackets for each size tank.
We use a Lab Grade Cold Chamber/Freezer.
We provide the heating jackets and they are included in the price of the Large Production Models.
Should you need to buy one separately, the cost of these jackets vary by size for each model extractor. Priced by the square foot.

You can elect to use lab grade vacuum pumps to speed up recovery but you may not want to set there and observe the recovery process into the late evening as is required when using vacuum pumps. Remember, If you start the extraction at 8 am, you will most likely be ready to recover the solvent by 1-2 pm. Even with a vacuum recovery set up, it will still take about 4-6 hours to recover 6-8 gallons of butane. And those pumps are not cheap.
When using our proprietary heating jackets on temperature monitoring timers, you can set it up to run over night and it will be completed by the next day when you return to start another extraction. So why use pumps that you have to monitor when you could be sleeping. Let a second shift work for you by allowing the extractor to do what is was designed to do. Both methods deliver an empty extractor in the morning to be used again.

______________________________________________________

Accessory Kits
For the Table Top Tamisium Extractors

Table Top Tamisium Extractor Accessories
PHOTO AND DESCRIPTION		USD PRICE
SAFETY QUICK DISCONNECT SETS STANDARD PACKAGE Includes 3 couplers & 3 nipples
	STANDARD PACKAGE SAFETY QUICK DISCONNECTS BRASS These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks. 1 Brass Coupler for Extractor 2 Brass Couplers for Recovery Line 3 Brass Nipples for Extractor	$79	BUY NOW
	STANDARD PACKAGE SAFETY QUICK DISCONNECTS STAINLESS STEEL These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks. 1 Stainless Coupler for Extractor 2 Stainless Couplers for Recovery Line 3 Stainless Nipples for Extractor	$179	BUY NOW
SAFETY QUICK DISCONNECT SETS DELUXE AND SUPER DELUXE PACKAGE Includes 6 couplers & 3 nipples
	DELUXE and SUPER DELUXE - SAFETY QUICK DISCONNECTS BRASS These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks. 1 Brass Coupler for Extractor 2 Brass Couplers for Recovery Line 1 Brass Coupler for Gauge, 1 Brass Coupler for Safety Purge Line 1 Brass Coupler for Schrader Valve Air Adaptor 3 Brass Nipples for Extractor	$109	BUY NOW
	DELUXE and SUPER DELUXE - SAFETY QUICK DISCONNECTS STAINLESS STEEL These QDs will stop flow upon disconnection if you forget to close the ball valves on your extractor or recovery tanks. 1 STAINLESS coupler for Extractor 2 STAINLESS couplers for Recovery Line 1 STAINLESS coupler for Gauge, 1 STAINLESS coupler for Safety Purge Line 1 STAINLESS coupler for Schrader Valve Air Adaptor 3 STAINLESS nipples for Extractor	$299	BUY NOW
ADD A SINGLE SAFETY QD
	BRASS Safety Quick Disconnect - 1/4" COUPLER Add a Safety Quick Disconnect to any accessory one at a time. This is the Female Coupler that fits the Male Nipple. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.	$16.99	BUY NOW

	BRASS Safety Quick Disconnect - 1/4" NIPPLE Add a Safety Quick Disconnect to any accessory one at a time. This is the Male Nipple that fits inside the Female Coupler. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.	$9.99	BUY NOW

	STAINLESS STEEL Safety Quick Disconnect - 1/4" COUPLER Add a Safety Quick Disconnect to any accessory one at a time. This is the Female Coupler that fits the Male Nipple. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.	$42.99	BUY NOW

	STAINLESS STEEL Safety Quick Disconnect - 1/4" NIPPLE Add a Safety Quick Disconnect to any accessory one at a time. This is the Male Nipple that fits inside the Female Coupler. Both Nipple and Coupler are 1/4 inch Male Pipe Threaded to fit Tamisium Extractors.	$21.99	BUY NOW

CUSTOM FITTED CONNECTIONS WITH PRESSURE TEST We will custom fit all your Ball Valves and Quick Disconnects using the proper Vices and Torque. After we fit all the Ball Valves and Quick Disconnects, we will pressure test your Extractor and check it for leaks. Make sure you have no problems by having us do what we have done hundreds of times. And have a ready to use extractor when it arrives at your door.		$40	BUY NOW
OTHER ACCESSORIES
	Laser Thermometer We use this thermometer to check when solvent recovery is complete. Without it you will have to remove and weigh the Recovery Tank when you think the Recovery Tank has collected all the solvent you began with. By monitoring the temperature drop you can establish a completion of solvent condensing.	$79.00	BUY NOW

	Pressure Gauge with BRASS QD Coupler 200 psi oil filled, Comes with BRASS Quick Disconnect (1/4" MNPT)	$29.99	BUY NOW

	Pressure Gauge with BRASS SAFETY QD Coupler 300 psi oil filled, Comes with BRASS SAFETY Quick Disconnect (1/4" MNPT)	$59.99	BUY NOW

	Pressure Gauge with STAINLESS SAFETY QD Coupler 300 psi oil filled, Comes with STAINLESS SAFETY Quick Disconnect (1/4" MNPT)	$79.99	BUY NOW

	Safety Purge Line with Brass QD 20 ft with 1/4 inch Quick Disconnect. Use with Standard QDs on Extractor Tank or RC Tank. These QDs will not interchange with Safety QDs.	$15.99	BUY NOW

	Safety Purge Line with Brass SAFETY QD Coupler 20 ft Purge Line with 1/4 inch Brass SAFETY Quick Disconnect. You can use this Safety Purge Line with SAFETY QDs on Extractor Tank or RC Tank. Brass Safety QDs will interchange with Stainless Safety QDs.	$26.99	BUY NOW

	Safety Purge Line with Stainless SAFETY QD Coupler 20 ft Black Purge Line with 1/4 inch Stainless SAFETY Quick Disconnect for easy line replacement. You can use this Safety Purge Line with SAFETY QDs on Extractor Tank or RC Tank. Brass Safety QDs will interchange with Stainless Safety QDs.	$54.99	BUY NOW

	Teflon Sealing Tape ( 260 foot x 1/2 inch )	$1.49	BUY NOW

	Granulated Activated Charcoal ( 1 pound ) This is not your average pet store Charcoal. The Granules are consistent in size and porosity and made specifically for lab filtering applications. It is specially treated for extra purity, non-toxic and safe to use.	$18.99	BUY NOW

	O-Rings for Extractor Tank only (larger o-ring) For 2 OZ Tamisium Extractor Tank (10 pack)	$14.99	BUY NOW

	O-Rings for Extractor Column and RC Tank For 2 OZ Tamisium Extractor Column / Recovery Tank (10 pack)	$9.99	BUY NOW

	Extra Butane Nozzle Adaptors For Disposable Solvent Canisters ( Teflon )	$7.99	BUY NOW

	D Limonene ( 1 gallon ) NOT IN STOCK Used to replace Naphtha when washing or transporting oils. A fairly non toxic substitute with comparable/better evaporation rates to Naphtha, No HasMat Fees and some consider superior cleaning abilities.	$44.99	BUY NOW

	Hard Carry Case with Adjust to Fit Foam Insert For 2 oz Extractor and Recovery Tank with Recovery Line setup	$79.99	BUY NOW

	Schrader Valve - High Pressure and Chemical Rated Used to add pressure safely to any tank or all tanks when assembled. Only comes in 1/4 inch Brass without QD. This valve is not an automotive Valve. It is the same size and can be used with any automotive air compressor but the chemical ratings on the seals and pressure ratings on this valve far exceed the pressure ratings of your typical Schrader Valves found on car tires. DONT TRY TO USE ANYTHING ELSE TO ADD PRESSURE!	$12.99	BUY NOW

MORE ACCESSORIES COMING SOON

Disposable Butane Canisters

Weight Scale in Grams; Various Sizes

Filter Disks

Internal Charcoal Insert Canisters

Heating Mantles

Separatory Funnels

Accessory Soft Case

Beakers

Quick Disconnect Options/Replacements - Stainless, Brass Nickel Plated, Brass Chrome Plated

Ball Valves Options/Replacements - Stainless, Brass Nickel Plated, Brass Chrome Plated

All of the prices on this site are in USD.

Please remember that most solvents are flammable. When opening and closing any of the extractors, please do so in a well ventilated, spark free environment. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Before disconnecting quick disconnects, make sure they BALL VALVES ARE CLOSED!. Double and triple check !! and again, only disconnect in a well ventilated area free from pilot lights and sparks or any other ignition sources.